轉子泵屬容積式泵的一種型式，通過轉子與泵體間的相對運動來改變工作容積 ，從而使流體的能量增加。

1.轉子泵中凡與輸送物料接觸的零配件，均采用符合衛生標準的不銹鋼材料制作，其密封件均采用無毒橡膠。可靠的防銹性和無毒密封性確保了安全衛生。

2.轉子的流線結構以及轉子室中無死點和非金屬件，避免了對被輸送物質造成污染。

3.適用于就地CIP清洗與蒸汽消毒，*符合美國FDA規范要求及醫藥級（GMP）規范要求。

4.特別適用于再輸送過程中容易起泡沫以及輸送高粘度、高濃度及任何含顆粒的介質，經其輸送的物料保持原有的品質部變，不起任何理化反應。

5.采用外裝動、靜環式機械密封，可直接水沖洗，耐高壓，不易磨損，無泄漏。

6.體積小，流量大，揚程壓力高，適用長距離與高阻力定量輸送。

7.泵的葉輪與傳動齒輪分開，且在泵腔內各零配件之間保證一定的間隙，相互不接觸，伍磨損，低噪音，可靠性好，使用壽命長，節能降耗。

8.配置變頻器后，可以隨意調節流量，并可做一般計量泵使用。

9.可輸送汽、液、固等三相混合物料。可以輸送的介質的粘度可高1000000CP和含固量達55%的漿料。

10.結構緊湊，維護方便，幾乎無易損件，運行成本低。

The rotor pump is a type of positive displacement pump, which changes the working volume through the relative movement between the rotor and the pump body, thereby increasing the energy of the fluid.

1. All the parts in the rotor pump that come into contact with the conveyed materials are made of stainless steel materials that meet hygienic standards, and their seals are made of non-toxic rubber. Reliable rust resistance and non-toxic sealing ensure safety and hygiene.

2. The streamline structure of the rotor and the absence of dead spots and non-metallic parts in the rotor chamber avoid pollution to the conveyed material.

3. It is suitable for in-situ CIP cleaning and steam sterilization, and fully complies with the requirements of the US FDA and pharmaceutical grade (GMP) specifications.

4. It is especially suitable for foaming during re-transportation and for conveying high-viscosity, high-concentration and any particle-containing media. The material conveyed through it maintains the original quality and does not have any physical and chemical reaction.

5. The external dynamic and static ring mechanical seals are used, which can be directly washed with water, resistant to high pressure, not easy to wear, and have no leakage.

6. Small volume, large flow, high lift pressure, suitable for long-distance and high-resistance quantitative transportation.

7. The impeller of the pump is separated from the transmission gear, and a certain gap is ensured between the parts in the pump chamber, without contact with each other, with no wear, low noise, good reliability, long service life, energy saving and consumption reduction.

8. After configuring the inverter, the flow can be adjusted at will, and it can be used as a general metering pump.

9. It can transport three-phase mixture materials such as vapor, liquid and solid. The viscosity of the medium that can be transported can be as high as 1,000,000 CP and the slurry with a solid content of up to 55%.

10. Compact structure, easy maintenance, almost no wearing parts, low operating cost.

圖片信息：304不銹鋼泵衛生級轉子泵工作原理廠家

公司簡介：

安徽利勒潔凈設備科技有限公司是國內專業生產制造潔凈衛生級閥門管件，主要應用于食品機械行業、制藥機械行業、乳制品行業、釀酒飲料行業以及精細化工等行業高精度衛生級流體設備的專業生產廠家，產品規格齊全；產品主要有：

無菌隔膜閥，卡箍直通隔膜閥，三通隔膜閥，法蘭隔膜閥，氣動隔膜閥，U型隔膜閥，罐底隔膜閥 ；

無菌球閥，卡箍直通球閥，螺紋球閥，焊接球閥，氣動球閥，法蘭球閥，電動球閥；

衛生級蝶閥，焊接蝶閥，卡箍直通蝶閥，螺紋蝶閥，法蘭蝶閥，氣動蝶閥，電動蝶閥；

不銹鋼衛生泵，不銹鋼衛生級離心泵，不銹鋼衛生自吸泵，不銹鋼酒精防爆泵，衛生奶泵，衛生飲料泵；

止回閥，過濾器、呼吸器、換向閥、防混閥、安全閥；304不銹鋼泵衛生級轉子泵工作原理廠家

衛生級不銹鋼管件，焊接彎頭，快裝彎頭，不銹鋼三通，快裝三通，四通，真空彎頭，大小頭；

罐頂組件系列，不銹鋼儲罐，發酵罐，不銹鋼衛生級人孔，清洗球/器，視鏡燈，排氣閥等其它非標產品生產加工；

我們竭誠為您服務.